Links

Microstrip and Printed Antenna Design 2nd Edition Errata
Page 48:  S = a*b  (not S = a in b)

Page 52: Equation 2.60 should be 2.62 in bottom paragraph

Page 62: Paragraph 3  ….rectangular microstrip antenna may……

Page 86: The delta L should read delta sub L = 0.84742 mm. Remove    the a prime = 2a.   a/2 = 21.21 mm + 0.84742 mm = 22.057 mm
                               b/2 = 21.21 mm – 0.84742 mm = 20.363 mm

Page 89: Bottom paragraph end:  ….points using (3.26). When then find magnitude of delta S using (3.30)

Page 94: Third paragraph …. (a) a TM21 (not TM11) mode….. (b) a TM11 (not TM21) mode…..

Page 110: Bottom paragraph: … RL = g3*50 ohm (not a semicolon)

Page 145: Equation (6.5) right hand denominator should be: (kh/2)v which matches the argument of the numerator

Page 151: Second paragraph …Figure (6-6) [not 6-7] presents an illustration……

Page 160: Third paragraph ….using the finite difference time domain….

Page 215: in Figure 7-29 ……edge resistance increases, and the location…..

Page 239: First paragraph….yarns may then be woven….